226D3 Skid Steer Loader

Engine

Gross Power - SAE J1995

67.1 hp

Net Power - SAE 1349

65.8 hp

Bore

3.3 in

Stroke

3.9 in

Displacement

134.3 in²

Peak Torque - 1,500 rpm - SAE J1995

153 ft·lbf

Engine Model

Cat C2.2 CRDI

Net Power - ISO 9249

66.5 hp

Operating Specifications

Rated Operating Capacity

1550 lb

Rated Operating Capacity with Optional Counterweight

1650 lb

Tipping Load

3100 lb

Breakout Force - Tilt Cylinder

3927 lb

Note

* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydra

Weights

Operating Weight

5849 lb

Note

* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydra

Cab

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 Level I

Service Refill Capacities

Engine Crankcase

2.6 gal (US)

Hydraulic Tank

9 gal (US)

Chain Box - Each Side

1.8 gal (US)

Hydraulic System

11.9 gal (US)

Fuel Tank

15.1 gal (US)

Cooling System

3.2 gal (US)

Dimensions

Length - With Bucket on Ground

127.3 in

Length - Without Bucket

99.4 in

Vehicle Width over Tires

58.9 in

Maximum Overall Height

143.8 in

Bucket Pin Height - Maximum Lift

110.9 in

Bucket Pin Height - Carry Position

8.5 in

Reach - Maximum Lift/Dump

21 in

Clearance at Maximum Lift and Dump

81.8 in

Ground Clearance

6.9 in

Departure Angle

27.9°

Maximum Dump Angle

46.7°

Rack Back Angle - Maximum Height

88.9°

Height - Top of Cab

79.8 in

Wheel Base

41.5 in

Turning Radius from Center - Coupler

43.5 in

Maximum Reach - With Arms Parallel to Ground

50.7 in

Note

* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydra

Bumper Overhang - Behind Rear Axle

35.2 in

Turning Radius from Center - Machine Rear

59.6 in

Turning Radius from Center - Bucket

77.8 in

Noise Level

Inside Cab**

83 dB(A)

Note (2)

**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The s

Note (3)

***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Outside Cab***

102 dB(A)

Note (1)

Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Hydraulic System

Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure

3336 psi

Hydraulic Flow - Standard - Loader Hydraulic Flow

18 gal/min

Hydraulic Flow - Standard - Hydraulic Power (Calculated)

33.5 hp

Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow

26 gal/min

Hydraulic Flow - Standard - Loader Hydraulic Pressure

3336 psi

Hydraulic Flow - High Flow - Hydraulic Power (Calculated)

50.9 hp

Power Train

Travel Speed - Forward or Reverse - Two Speed Option

11.1 mile/h

Travel Speed - Forward or Reverse - One Speed

7.6 mile/h

Shipping

UPC

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equi