Weights

Operating Weight

44469 lb

Note

Weight based on a machine configuration with Parallel lift z-bar linkage, Bridgestone 23.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fende

Engine

Maximum Power - 2,100 rpm - ISO 14396

269 HP

Maximum Gross Power - 2,100 rpm - SAE J1995

273 HP

Maximum Net Power - 2,100 rpm - ISO 9249

251 HP

Note (1)

The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.

Displacement

427 in²

Note (2)

Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower carbon intensity fuels up to: • 20% biodiesel FAME (fa

Engine Model

Cat C7.1

Note

Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards

Dimensions - Standard Lift

Height - Top of Hood

8.75 ft

Height - Top of ROPS

11.25 ft

Ground Clearance

1.08 ft

Wheel Base

10.92 ft

Overall Length - Without Bucket

23.83 ft

Hinge Pin Height at Carry Height

2.17 ft

Hinge Pin Height at Maximum Lift

13.83 ft

Lift Arm Clearance at Maximum Lift

11.33 ft

Rack Back - Maximum Lift

55 °

Rack Back - Carry Height

51 °

Tread Width

7 ft

Note

All dimensions are approximate and based on machine equipped with 3.3 m3 (4.3 yd3 ) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires.

Dimensions - High Lift

Height - Top of Hood

8.75 ft

Height - Top of ROPS

11.25 ft

Ground Clearance

1.08 ft

Wheel Base

10.92 ft

Overall Length - Without Bucket

25.17 ft

Hinge Pin Height at Carry Height

2.5 ft

Hinge Pin Height at Maximum Lift

14.75 ft

Lift Arm Clearance at Maximum Lift

11.83 ft

Tread Width

7 ft

Note

All dimensions are approximate and based on machine equipped with 3.3 m3 (4.3 yd3 ) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires.

Sound

Operator Sound Pressure Level - ISO 6396:2008

70 dB(A)

Operator Sound Pressure Level - ISO 6396:2008 ¹

69 dB(A)

Note

¹Operator Sound Pressure Level - Including countries that adopt the EU and UK Directives.

Note (1)

¹Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701

Hydraulic System

Implement System - Maximum Pump Output at 2,340 rpm

85 gal/min

Implement System - Maximum Operating Pressure

4250 psi

Hydraulic Cycle Time - Total

9.4 s

Service Refill Capacities

DEF Tank

4 gal (US)

Differential - Final Drives - Front

11.4 gal (US)

Differential - Final Drives - Rear

11.4 gal (US)

Hydraulic Tank

25.6 gal (US)

Crankcase

5.5 gal (US)

Cooling System

14.3 gal (US)

Fuel Tank

68.6 gal (US)

Transmission

11.4 gal (US)

Operating Specifications

Static Tipping Load - Full 40° Turn - No Tire Deflection

27529 lb

Breakout Force

42489 lbf

Note

For a machine configuration as defined under “Weight.”

Note (1)

Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Transmission

Forward - 3

12 mile/h

Forward - 4

16 mile/h

Forward - 5

24.5 mile/h

Reverse - 3

16 mile/h

Note

Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.

Forward - 1

4.3 mile/h

Forward - 2

7.5 mile/h

Reverse - 1

4.3 mile/h

Reverse - 2

7.5 mile/h

Transmission Specifications

6F Gear Ratio

9.33

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a