Get a Quote
There is currently no image for this product.
950M Wheel Loader
Get A Quote

The new 950M Wheel Loader has a U.S. EPA Tier 4 Final/EU Stage IV ACERT™ engine equipped with a combination of proven electronic, fuel, air and aftertreatment components. Applying proven technologies systematically and strategically lets us meet our customer’s high expectations for productivity, fuel efficiency, reliability and service life. Deep system integration results in reduced emissions, improved performance and improved fuel economy without interrupting machine performance making it seamless to operators. M Series Loaders are 10% more fuel efficient than the K Series Loaders and up to 25% more efficient than the H Series Loaders they replace. (Fuel efficiency is measured in mass of material moved per volume of fuel burned. Average efficiency improvement as tested and analyzed for an average composite cycle and stand configuration with variations per comparable model with and without economy mode active. Factors influence result variation such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.) Optional configurations are available. (Optional configuration and equipment may vary from region to region. Consult your Caterpillar representative for further details.)



Net Power - ISO 9249
230 hp
Engine Model
Cat C7.1 ACERT
250 in
249 in
428 in3
Maximum Gross Power (1,800 rpm) - SAE J1995
253 hp
Maximum Gross Power - SAE J1995
230 hp
Maximum Net Power (1,700 rpm) - SAE J1349
230 hp
Maximum Net Power - SAE J1349
232 hp
Maximum Net Torque (1,000 rpm) - SAE J1349
911 lb ft
Peak Gross Torque (1,200 rpm) - SAE J1995
908 lb ft


Operating Weight
42357 lb


Forward 1
4.3 mph
Forward 2
7.5 mph
Forward 3
12.0 mph
Forward 4
16.0 mph
Reverse 1
4.3 mph
Reverse 2
7.5 mph
Reverse 3
16.0 mph


Bucket Capacities
2.5-9.2 m³ (3.3-12.0 yd³)


Exterior Sound Power Level (ISO 6395:2008)
108 dB(A)
Exterior Sound Power Level (SAE J88:2013)
75 dB(A)* dB(A)

Service Refill Capacities

Cooling System
15.6 gal
5.8 gal
11.4 gal
Differentials and Final Drives - Front
11.4 gal
Differentials and Final Drives - Rear
11.4 gal
Hydraulic Tank
33.0 gal
DEF Tank
4.2 gal
Fuel Tank
72.6 gal

Operating Specifications

Breakout Force
40690 lb
Static Tipping Load - Full 37° Turn - No Tire Deflection
25926 lb
Static Tipping Load - Full 37° Turn - With Tire Deflection
24262 lb

Hydraulic System

Hydraulic Cycle Time with Rated Payload - Total
8.9 Seconds
Implement Pump Type
Variable Axial Piston
Implement System - Maximum Operating Pressure
4250 psi
Implement System - Maximum Pump Output (2,200 rpm)
76 gal/min