Get a Quote

The Cat® 232D Skid Steer Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its stability and lifting performance provides excellent material handling.

Cat Specs
Photos
Downloads

Engine

Net Flywheel Power
65.8 HP
Net Power - SAE 1349
65.8 HP
Bore
3.3 in
Stroke
3.9 in
Displacement
134.3 in³
Engine Model
Cat C2.2 CRDI
Peak Torque - 1,500 rpm - SAE J1995
153 ft·lbf
Net Power - ISO 9249
66.5 HP
Gross Power - SAE J1995
67.1 HP

Weights

Operating Weight
6213 lb
Note
*Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C

Operating Specifications

Rated Operating Capacity
1850 lb
Tipping Load
3700 lb
Breakout Force - Tilt Cylinder
3984 lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0
Rated Operating Capacity with Optional Counterweight
1950 lb

Dimensions

Vehicle Width over Tires
58.9 in
Departure Angle
27.9°
Maximum Dump Angle
47.4°
Height - Top of Cab
79.9 in
Wheel Base
41.5 in
Turning Radius from Center - Coupler
43.4 in
Clearance at Maximum Lift and Dump
88.7 in
Maximum Overall Height
150.9 in
Bucket Pin Reach - Maximum Lift
8.8 in
Reach - Maximum Lift/Dump
25.7 in
Turning Radius from Center - Machine Rear
59.6 in
Ground Clearance
6.7 ft
Length - With Bucket on Ground
127.3 in
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0
Bucket Pin Height - Carry Position
8.4 in
Maximum Reach - With Arms Parallel to Ground
49.2 in
Bumper Overhang - Behind Rear Axle
35.2 in
Turning Radius from Center - Bucket
77.8 in
Length - Without Bucket
99.3 in
Bucket Pin Height - Maximum Lift
118.1 in
Rack Back Angle - Maximum Height
88.2°

Cab

FOPS Level II
ISO 3449:2005 Level II
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I

Service Refill Capacities

Cooling System
3.2 gal (US)
Hydraulic System
11.9 gal (US)
Engine Crankcase
2.6 gal (US)
Hydraulic Tank
9 gal (US)
Fuel Tank
15.1 gal (US)
Chain Box - Each Side
1.8 gal (US)

Noise Level

Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Outside Cab**
101 dB(A) dB(A)
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The so
Inside Cab*
83 dB(A) dB(A)

Hydraulic System

Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
26 gal/min
Hydraulic Flow - Standard - Loader Hydraulic Flow
18 gal/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
3336 psi
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3336 psi
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
50.9 HP
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
35.5 HP

Power Train

Travel Speed - Forward or Reverse - One Speed
7.6 mile/h
Travel Speed - Forward or Reverse - Two Speed Option
11.1 mile/h

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equi