Get a Quote

226D3 Skid Steer Loader

226D3 Skid Steer Loader 360
360° Exterior View
360° Interior View

The model image shown is for demonstration purposes only. Please contact us for complete unit details.

Request
A Quote
Call Us Contact Us About This Equipment

The Cat® 226D3 Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

Listing Details
Cat Specs
Photos
Downloads

Description

ID Number
M24217
Make
CATERPILLAR
Model
226D3
Model Year
2023
Product Family
Skid Steer and Compact Track Loaders
Serial Number
0EK502216
Location
PLEASANT GROVE 7518

Weights

Operating Weight
5849 lb
Note
* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydra

Engine

Gross Power - SAE J1995
67.1 HP
Net Power - SAE 1349
65.8 HP
Bore
3.3 in
Stroke
3.9 in
Displacement
134.3 in²
Engine Model
Cat C2.2 CRDI
Net Power - ISO 9249
66.5 HP
Peak Torque - 1,500 rpm - SAE J1995
153 ft·lbf

Operating Specifications

Rated Operating Capacity
1550 lb
Note
* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydra
Rated Operating Capacity with Optional Counterweight
1650 lb
Tipping Load
3100 lb
Breakout Force - Tilt Cylinder
3927 lb

Service Refill Capacities

Hydraulic Tank
9 gal (US)
Chain Box - Each Side
1.8 gal (US)
Fuel Tank
15.1 gal (US)
Cooling System
3.2 gal (US)
Hydraulic System
11.9 gal (US)
Engine Crankcase
2.6 gal (US)

Dimensions

Length - With Bucket on Ground
127.3 in
Length - Without Bucket
99.4 in
Vehicle Width over Tires
58.9 in
Maximum Overall Height
143.8 in
Bucket Pin Height - Maximum Lift
110.9 in
Bucket Pin Height - Carry Position
8.5 in
Reach - Maximum Lift/Dump
21 in
Clearance at Maximum Lift and Dump
81.8 in
Ground Clearance
6.9 in
Departure Angle
27.9°
Maximum Dump Angle
46.7°
Rack Back Angle - Maximum Height
88.9°
Height - Top of Cab
79.8 in
Wheel Base
41.5 in
Turning Radius from Center - Machine Rear
59.6 in
Turning Radius from Center - Bucket
77.8 in
Turning Radius from Center - Coupler
43.5 in
Maximum Reach - With Arms Parallel to Ground
50.7 in
Note
* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydra
Bumper Overhang - Behind Rear Axle
35.2 in

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I

Noise Level

Outside Cab***
102 dB(A)
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Inside Cab**
83 dB(A)
Note (2)
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The s
Note (3)
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Hydraulic System

Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
26 gal/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3336 psi
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
50.9 HP
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
3336 psi
Hydraulic Flow - Standard - Loader Hydraulic Flow
18 gal/min
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
33.5 HP

Power Train

Travel Speed - Forward or Reverse - One Speed
7.6 mile/h
Travel Speed - Forward or Reverse - Two Speed Option
11.1 mile/h

Dimensions (Approximate) - Quick Coupler and Fork

Front Axle Centerline to Bucket Tip
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equi ft