395 Excavator
The Cat 395 gets every job done every time. A 10% higher digging force eases bucket penetration to reduce digging cycle time in the most demanding applications. With up to a 15% higher payload and the ability to carry the SD6.5m3 bucket, this mass excavator can load a 70-ton off-road truck in 5-6 passes. For deep trenching work, the 395 digs down deep with maximum digging depths from 7190mm (23’7” ft) up to 11 710 (38’5” ft). The 395 is built for extreme durability with 2x reinforced booms, sticks, upper and lower frames. Reduced hydraulic oil capacity, improved filters with longer service intervals, and an integrated auto-lube-ready system save you up to 20% in maintenance costs. Equipped with the latest technology and data, the 395 helps you make informed and smart decisions to improve efficiency, increase productivity, and enhance safety.
Weights
- Operating Weight
- 207400 lb
- Note (1)
- Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device.
Service Refill Capacities
- DEF Tank
- 21 gal (US)
- Hydraulic Tank
- 98 gal (US)
- Hydraulic System - Including Tank
- 196 gal (US)
- Fuel Tank Capacity
- 322 gal (US)
- Final Drive - Each
- 5 gal (US)
- Swing Drive
- 6 gal (US)
- Engine Oil
- 18 gal (US)
- Cooling System
- 19 gal (US)
Engine
- Engine Power - ISO 14396
- 543 HP
- Net Power - ISO 9249 (DIN)
- 550 hp (metric)
- Engine Power - ISO 14396 (DIN)
- 551 hp (metric)
- Bore
- 6 in
- Stroke
- 7 in
- Displacement
- 1105 in²
- Note (1)
- Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is t
- Note (2)
- ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (f
- Emissions
- Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
- Engine Model
- Cat C18
- Net Power - ISO 9249
- 542 HP
Hydraulic System
- Maximum Pressure - Equipment
- 5366 psi
- Maximum Pressure - Travel
- 5076 psi
- Maximum Pressure - Swing
- 4496 psi
Swing Mechanism
- Swing Speed
- 6.26 r/min
- Maximum Swing Torque
- 267333 lb/ft
Dimensions
- Ground Clearance
- 2.9 in
- Tail Swing Radius
- 15.11 in
- Counterweight Clearance
- 5.5 in
- Track Length
- 20.1 in
- Transport Width
- 12.9 in
- Shipping Length
- 49.6 ft
- Track Gauge
- 11.6 in
- Note
- Track gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has
Shipping
- UPC
- 98%
