Get a Quote

The Cat 930M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage V emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.

Cat Specs
Photos
Downloads

Engine

Maximum Gross Power
168 HP
Engine Model
Cat C7.1**
Maximum Gross Power - 1,800 rpm - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
170 mhp
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
163 HP
Note (2)
*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (1)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission compon
Note (3)
**The Cat C7.1 engine meets Tier 4 Final/Stage V off-highway emission standards.
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156 HP
Displacement (Standard Power Mode: Speed Range 1-3*)
427 in³
Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4)
168 HP
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
601 ft·lbf
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
166 mhp
Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*)
160 HP
Maximum Gross Power - 1,600 rpm - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
162 mhp
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)
588 ft·lbf
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
573 ft·lbf
Displacement (Performance Power Mode: Speed Range 1-4)
427 in³
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
158 mhp
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
586 ft·lbf

Weights

Operating Weight
31382 lb

Buckets

Bucket Capacities
2.1-5.0 m3 (2.7-6.5 yd3)
Bucket Capacities - Light Material
3.1-5.0 m³ (4.0-6.5 yd³)
Bucket Capacities - General Purpose
2.1-2.7 m³ (2.7-3.5 yd³)

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equiv

Axles

Front
Fixed; Locking differential (standard)
Rear
Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note (3)
*The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are:
– Standard cab: 68 ±3 dB(A)
– Deluxe cab: 66 ±2 dB(A)
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Service Refill Capacities

Hydraulic Tank
23.8 gal (US)
Transmission - Gear Box
2.2 gal (US)
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
Front Axles
6.9 gal (US)
Cooling System
7.9 gal (US)
Rear Axles
6.6 gal (US)
Fuel Tank
51.5 gal (US)
Engine Crankcase
5.3 gal (US)
Hydraulic System - Including Tank
43.6 gal (US)
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

Tires

Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Other Choices Include
20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 600/65 R25 radial (L-3); Skidder/Agriculture; Solid Tires
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Standard Size
20.5 R25, radial (L-3)

Steering

Maximum Flow - Steering Pump
34 gal/min
Maximum Steering Torque - 40° (Full Turn)
27747 ft·lbf
Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed
2.4 s
Steering Articulation Angle - Each Direction
40°
Maximum Working Pressure - Steering Pump
3500 psi
Maximum Steering Torque - 0° (Straight Machine)
37155 ft·lbf
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.5 turns

Transmission

Forward and Reverse - Range 2
8 mile/h
Note
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 3
17 mile/h
Forward and Reverse - Range 4
25 mile/h

Loader Hydraulic System

Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height
1.5 s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift
5.1 s
Maximum Working Pressure - Implement Pump
3771 psi
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level
2.7 s
Relief Pressure - Tilt Cylinder
4061 psi
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height
1.7 s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift
5.7 s
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
3771 psi
Maximum Flow - Implement Pump
50 gal/min
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time
10.1 s
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4061 psi
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time
9.3 s
Note (1)
*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level
2.7 s

Shipping

UPC
50

Sound

Note (1)
European Union Directive “2000/14/EC”