Get a Quote

Cat® wheel loaders set the standard for productivity, fuel efficiency, operator comfort and low operating costs. The Cat 930 Small Wheel Loader features a high torque C7.1 engine that works in conjunction with an intelligent hydrostatic power train to deliver exceptional fuel efficiency. Meets U.S. EPA Tier 4 Final and EU Stage V emission standards, designed to manage itself so you can concentrate on your work. Extended service intervals to 1000 hours reduce fluid and filter use by up to 45% (compared to previous M Series models) while keeping operating cost low.

Cat Specs


Operating Weight
31124 lb
Operating Weight - High Lift
31633 lb


Bucket Capacities
1.9-5.0 m3 (2.5-6.5 yd3)


ISO 3471:2008
ISO 3449:2005 LEVEL II


Standard Size
20.5 R25, radial (L-3)
Other Choices Include
20.5 R25, radial (L-2), 20.5 R25, radial (L-5), 20.5-25 12PR (L-2), 20.5-25 12PR (L-3), 20.5-25 16PR (L-5), 17.5 R25, radial (L-2), 17.5 R25, radial (L-3), 17.5 R25, radial (L-5), 550/65 R25 radial (L
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.


Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2
8 mile/h
Forward and Reverse - Range 3
17 mile/h
Forward and Reverse - Range 4
25 mile/h
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).

Loader Hydraulic System

Maximum Flow - Implement Pump
50 gal/min
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min
Maximum Working Pressure - Implement Pump
3771 psi
Relief Pressure - Tilt Cylinder
4061 psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
3771 psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4061 psi
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.1 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
2.7 s
Hydraulic Cycle Time - Total Cycle Time
9.3 s
*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.

Service Refill Capacities

Engine Crankcase
5.3 gal (US)
Transmission - Gear Box
2.2 gal (US)
Front Axles
6.9 gal (US)
Hydraulic Tank
23.8 gal (US)
Rear Axles
6.6 gal (US)
Hydraulic System - Including Tank
43.6 gal (US)
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
DEF used in Cat systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1:2019.
Cooling System
7.9 gal (US)
Fuel Tank
51.5 gal (US)


Note (1)
European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701.


Maximum Flow - Steering Pump
34 gal/min
Maximum Working Pressure - Steering Pump
3500 psi


4 in
5 in
427 in²
Note (1)
Advertised power is tested per the specified standard in effect at the time of manufacture
Note (2)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when engine is equipped with alternator, air cleaner, emission components
Maximum Gross Torque - SAE J1995
608 ft·lbf
Maximum Gross Torque - ISO 14396
601 ft·lbf
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Engine Model
Cat C7.1*
*Meets U.S EPA Tier 4 Final, EU Stage V off-highway, and Japan 2014 emission standards.

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a


Fixed; Locking differential (standard)
Oscillating ± 11 degrees; Open differential (standard); Limited slip differential (optional)


Dimensions listed are for a machine configured with 2.1 m³ (2.7 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.