Get a Quote
920 Compact Wheel Loader 360

The model image shown is for demonstration purposes only. Please contact us for complete unit details.

The Cat® 920 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.

Listing Details
Cat Specs
Photos
Downloads

Description

ID Number
M24574
Make
CATERPILLAR
Model
920
Model Year
2024
Product Family
Wheel Loaders
Serial Number
0SL402027
Location
STOCKTON 1521

Engine

Maximum Gross Power
121 HP
Bore
3.85 in
Stroke
4.72 in
Rated Net Power - SAE J1349
120 HP
Displacement
220 in²
Maximum Gross Torque - SAE J1995
372 ft·lbf
Maximum Gross Torque - ISO 14396
369 ft·lbf
Emissions
Engine meets Tier 4 Final/Stage V emission standards.
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Engine Model
Cat C3.6

Weights

Operating Weight
21742 lb

Buckets

Bucket Capacities
1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material
2.5-3.5 m³ (3.3-4.6 yd³)

Tires

Standard Size
17.5 R25 L2 XTLA
Other Choices Include
17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Loader Hydraulic System

Maximum Flow - Implement Pump
43.6 gal/min
Maximum Working Pressure - Implement Pump
4061 psi
Relief Pressure - Tilt Cylinder
4641 psi
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
4.8 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
2.7 s
Hydraulic Cycle Time - Total Cycle Time
11.5 s
Note
All cycle times listed are with cylinder snubbing turned off.

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).

Service Refill Capacities

Engine Crankcase
2.6 gal (US)
Hydraulic Tank
14.5 gal (US)
Hydraulic System - Including Tank
25.9 gal (US)
Diesel Exhaust Fluid (DEF) Tank
4.8 gal (US)
Note
DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Fuel Tank
43.6 gal (US)
Cooling System
5.7 gal (US)
Transmission
0.8 gal (US)

Steering

Maximum Flow - Steering Pump
21.7 gal/min
Maximum Working Pressure - Steering Pump
3190 psi

Transmission

Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Axles

Front
Fixed; Locking differential (standard)
Rear
Oscillating ±11 degrees; Locking differential (standard)

Shipping

UPC
95%