920 Compact Wheel Loader
The Cat® 920 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.
Engine
- Maximum Gross Power
- 121 hp
- Bore
- 3.85 in
- Stroke
- 4.72 in
- Rated Net Power - SAE J1349
- 120 hp
- Displacement
- 220 in²
- Maximum Gross Torque - SAE J1995
- 372 ft·lbf
- Maximum Gross Torque - ISO 14396
- 369 ft·lbf
- Emissions
- Engine meets Tier 4 Final/Stage V emission standards.
- Note
- Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
- Engine Model
- Cat C3.6
Weights
- Operating Weight
- 21742 lb
Buckets
- Bucket Capacities
- 1.3-3.5 m3 (1.7-4.6 yd3)
- Bucket Capacities - General Purpose
- 1.3-1.9 m³ (1.7-2.5 yd³)
- Bucket Capacities - Light Material
- 2.5-3.5 m³ (3.3-4.6 yd³)
Tires
- Standard Size
- 17.5 R25 L2 XTLA
- Other Choices Include
- 17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid
- Note (1)
- Other tire choices are available. Contact your Cat dealer for details.
- Note (2)
- In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
- Note (3)
- Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Loader Hydraulic System
- Maximum Flow - Implement Pump
- 43.6 gal/min
- Maximum Working Pressure - Implement Pump
- 4061 psi
- Relief Pressure - Tilt Cylinder
- 4641 psi
- Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
- 4.8 s
- Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
- 2.7 s
- Hydraulic Cycle Time - Total Cycle Time
- 11.5 s
- Note
- All cycle times listed are with cylinder snubbing turned off.
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005
- Note (1)
- Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
- Note (2)
- The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
- Note (3)
- The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Service Refill Capacities
- Engine Crankcase
- 2.6 gal (US)
- Hydraulic System - Including Tank
- 25.9 gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 4.8 gal (US)
- Note
- DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
- Hydraulic Tank
- 14.5 gal (US)
- Fuel Tank
- 43.6 gal (US)
- Cooling System
- 5.7 gal (US)
- Transmission
- 0.8 gal (US)
Steering
- Maximum Flow - Steering Pump
- 21.7 gal/min
- Maximum Working Pressure - Steering Pump
- 3190 psi
Transmission
- Note
- *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Axles
- Front
- Fixed; Locking differential (standard)
- Rear
- Oscillating ±11 degrees; Locking differential (standard)
Shipping
- UPC
- 95%
