Get a Quote

The Cat® 914 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.

Cat Specs
Photos
Downloads

Engine

Maximum Gross Power
110 HP
Bore
3.85 in
Stroke
4.72 in
Displacement
220 in²
Rated Net Power - SAE J1349
99 HP
Maximum Gross Torque - SAE J1995
335 ft·lbf
Maximum Gross Torque - ISO 14396
332 ft·lbf
Emissions
Engine meets Tier 4 Final/Stage V emission standards.
Engine Model
Cat C3.6
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.

Weights

Operating Weight
19103 lb

Buckets

Bucket Capacities
1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material
2.5-3.5 m³ (3.3-4.6 yd³)

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).

Loader Hydraulic System

Maximum Flow - Implement Pump
39 gal/min
Maximum Working Pressure - Implement Pump
4061 psi
Relief Pressure - Tilt Cylinder
4931 psi
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7 s
Hydraulic Cycle Time - Total Cycle Time
12.5 s

Tires

Standard Size
17.5 R25 L2 XTLA
Other Choices Include
17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Service Refill Capacities

Engine Crankcase
2.6 gal (US)
Hydraulic Tank
14.5 gal (US)
Hydraulic System - Including Tank
25.9 gal (US)
Diesel Exhaust Fluid (DEF) Tank
4.8 gal (US)
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Fuel Tank
43.6 gal (US)
Cooling System
5.7 gal (US)
Transmission
0.8 gal (US)

Steering

Maximum Flow - Steering Pump
22 gal/min
Maximum Working Pressure - Steering Pump
3263 psi

Transmission

Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Axles

Front
Fixed; Locking differential (standard)
Rear
Oscillating ±11 degrees; Locking differential (Standard)

Shipping

UPC
95%