Engine

Gross Power - SAE J1995

74.3 HP

Net Power - SAE 1349

72.9 HP

Bore

3.7 in

Stroke

4.7 in

Displacement

203 in²

Peak Torque - 1,500 rpm - SAE J1995

195 ft·lbf

Engine Model

Cat C3.3B DIT (turbo)

Net Power - ISO 9249

73.7 HP

Weights

Operating Weight

7478 lb

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow

Operating Specifications

Rated Operating Capacity

2200 lb

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow

Rated Operating Capacity with Optional Counterweight

2410 lb

Tipping Load

4400 lb

Breakout Force - Tilt Cylinder

7355 lb

Service Refill Capacities

Hydraulic Tank

10.3 gal (US)

Chain Box - Each Side

3.3 gal (US)

Engine Crankcase

3 gal (US)

Fuel Tank

27.7 gal (US)

Cooling System

3.7 gal (US)

Hydraulic System

13.7 gal (US)

Dimensions

Length - With Bucket on Ground

146 in

Length - Without Bucket

117.8 in

Vehicle Width over Tires

66 in

Maximum Overall Height

158.7 in

Bucket Pin Height - Maximum Lift

124.2 in

Bucket Pin Height - Carry Position

7.9 in

Reach - Maximum Lift/Dump

23.6 in

Clearance at Maximum Lift and Dump

97.1 in

Ground Clearance

8.9 in

Departure Angle

26°

Maximum Dump Angle

39°

Rack Back Angle - Maximum Height

96°

Height - Top of Cab

83.1 in

Wheel Base

49.2 in

Turning Radius from Center - Bucket

85.9 in

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow

Bumper Overhang - Behind Rear Axle

42.6 in

Turning Radius from Center - Machine Rear

71.2 in

Turning Radius from Center - Coupler

55.2 in

Maximum Reach - With Arms Parallel to Ground

54.6 in

Cab

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 Level I

Hydraulic System

Hydraulic Flow - Standard - Hydraulic Power (Calculated)

44 HP

Hydraulic Flow - Standard - Loader Hydraulic Flow

23 gal/min

Hydraulic Flow - Standard - Loader Hydraulic Pressure

3335 psi

Noise Level

Note (3)

**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Note (1)

Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Note (2)

*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The so

Shipping

UPC

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equiv

Power Train

Travel Speed - Forward or Reverse - One Speed

7.7 mile/h

Travel Speed - Forward or Reverse - Two Speed Option

11 mile/h