Engine

Gross Power - SAE J1995

74.3 HP

Net Power - SAE 1349

73.2 HP

Bore

3.7 in

Stroke

4.7 in

Displacement

203 in²

Engine Model

Cat C3.3B DIT (turbo)

Peak Torque - 1,500 rpm - SAE J1995

195 ft·lbf

Net Power - ISO 9249

73.9 HP

Weights

Operating Weight

7138 lb

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hyd

Operating Specifications

Rated Operating Capacity

2200 lb

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hyd

Rated Operating Capacity with Optional Counterweight

2410 lb

Tipping Load

4400 lb

Breakout Force - Tilt Cylinder

4963 lb

Service Refill Capacities

Hydraulic Tank

10.3 gal (US)

Chain Box - Each Side

2.3 gal (US)

Hydraulic System

13.2 gal (US)

Engine Crankcase

3 gal (US)

Fuel Tank

24.8 gal (US)

Cooling System

3.7 gal (US)

Dimensions

Length - With Bucket on Ground

137.3 in

Length - Without Bucket

108.9 in

Vehicle Width over Tires

66 in

Maximum Overall Height

154.2 in

Bucket Pin Height - Maximum Lift

121.1 in

Bucket Pin Height - Carry Position

7.9 in

Reach - Maximum Lift/Dump

21.7 in

Clearance at Maximum Lift and Dump

90 in

Ground Clearance

8.7 in

Departure Angle

27°

Maximum Dump Angle

52°

Rack Back Angle - Maximum Height

87°

Height - Top of Cab

83.1 in

Wheel Base

43.5 in

Turning Radius from Center - Machine Rear

64.5 in

Maximum Reach - With Arms Parallel to Ground

49.2 in

Bumper Overhang - Behind Rear Axle

40.2 in

Turning Radius from Center - Coupler

51.8 in

Turning Radius from Center - Bucket

83 in

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hyd

Cab

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 Level I

Noise Level

Note (1)

Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Inside Cab**

83 dB(A)

Note (2)

**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The s

Outside Cab***

101 dB(A)

Note (3)

***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Shipping

UPC

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equi

Hydraulic System

Hydraulic Flow - High Flow - Hydraulic Power (Calculated)

58 HP

Hydraulic Flow - Standard - Hydraulic Power (Calculated)

39 HP

Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow

30 gal/min

Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure

3335 psi

Hydraulic Flow - Standard - Loader Hydraulic Flow

20 gal/min

Hydraulic Flow - Standard - Loader Hydraulic Pressure

3335 psi

Power Train

Travel Speed - Forward or Reverse - One Speed

7.5 mile/h

Travel Speed - Forward or Reverse - Two Speed Option

11.5 mile/h