Engine

Gross Power - SAE J1995

74.3 HP

Net Power - SAE 1349

73.2 HP

Bore

3.7 in

Stroke

4.7 in

Displacement

203 in²

Engine Model

Cat 3.3B DIT (turbo)

Peak Torque - 1,500 rpm - SAE J1995

195 ft·lbf

Net Power - ISO 9249

73.9 HP

Weights

Operating Weight

6567 lb

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hyd

Operating Specifications

Rated Operating Capacity

1800 lb

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hyd

Rated Operating Capacity with Optional Counterweight

2000 lb

Tipping Load

3600 lb

Breakout Force - Tilt Cylinder

5003 lb

Service Refill Capacities

Hydraulic Tank

10.3 gal (US)

Chain Box - Each Side

2.3 gal (US)

Engine Crankcase

3 gal (US)

Fuel Tank

24.8 gal (US)

Cooling System

3.7 gal (US)

Hydraulic System

13.2 gal (US)

Dimensions

Length - With Bucket on Ground

137.3 in

Length - Without Bucket

108.9 in

Vehicle Width over Tires

66 in

Maximum Overall Height

156.6 in

Bucket Pin Height - Maximum Lift

122.9 in

Bucket Pin Height - Carry Position

7.5 in

Reach - Maximum Lift/Dump

16 in

Clearance at Maximum Lift and Dump

92.9 in

Ground Clearance

7.7 in

Departure Angle

26°

Maximum Dump Angle

48°

Rack Back Angle - Maximum Height

91°

Height - Top of Cab

82 in

Wheel Base

43.5 in

Bumper Overhang - Behind Rear Axle

40.2 in

Turning Radius from Center - Bucket

83 in

Maximum Reach - With Arms Parallel to Ground

53.3 in

Turning Radius from Center - Coupler

51.8 in

Turning Radius from Center - Machine Rear

64.5 in

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hyd

Cab

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 Level I

Power Train

Travel Speed - Forward or Reverse - One Speed

7 mile/h

Travel Speed - Forward or Reverse - Two Speed Option

10.6 mile/h

Hydraulic System

Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure

3335 psi

Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow

30 gal/min

Hydraulic Flow - Standard - Hydraulic Power (Calculated)

39 HP

Hydraulic Flow - High Flow - Hydraulic Power (Calculated)

58 HP

Hydraulic Flow - Standard - Loader Hydraulic Flow

20 gal/min

Hydraulic Flow - Standard - Loader Hydraulic Pressure

3335 psi

Noise Level

Note (3)

**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Note (2)

*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The so

Note (1)

Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Shipping

UPC

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equi