Get a Quote

The Cat® 232D3 Skid Steer Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its stability and lifting performance provides excellent material handling.

Cat Specs
Photos
Downloads

Engine

Gross Power - SAE J1995
67.1 HP
Net Power - ISO 9249
66.5 HP
Net Power - SAE 1349
65.8 HP
Bore
3.3 in
Stroke
3.9 in
Displacement
134.3 in²
Peak Torque - 1,500 rpm - SAE J1995
153 ft·lbf
Engine Model
Cat C2.2 CRDI

Operating Specifications

Rated Operating Capacity
1900 lb
Rated Operating Capacity with Optional Counterweight
2000 lb
Tipping Load
3800 lb
Breakout Force - Tilt Cylinder
3928 lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraul

Weights

Operating Weight
6514 lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraul

Dimensions

Length - With Bucket on Ground
127.3 in
Length - Without Bucket
99.3 in
Vehicle Width over Tires
58.9 in
Maximum Overall Height
150.9 in
Bucket Pin Height - Maximum Lift
118.1 in
Bucket Pin Height - Carry Position
8.4 in
Reach - Maximum Lift/Dump
25.7 in
Clearance at Maximum Lift and Dump
88.7 in
Departure Angle
27.9°
Maximum Dump Angle
47.4°
Rack Back Angle - Maximum Height
88.2°
Height - Top of Cab
79.9 ft
Wheel Base
41.5 ft
Bumper Overhang - Behind Rear Axle
35.2 in
Ground Clearance
6.7 ft
Turning Radius from Center - Coupler
43.4 in
Turning Radius from Center - Bucket
77.8 in
Turning Radius from Center - Machine Rear
59.6 in
Maximum Reach - With Arms Parallel to Ground
49.2 in
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraul

Service Refill Capacities

Chain Box - Each Side
1.8 gal (US)
Fuel Tank
15.1 gal (US)
Cooling System
3.2 gal (US)
Hydraulic System
11.9 gal (US)
Engine Crankcase
2.6 gal (US)
Hydraulic Tank
9 gal (US)

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I

Hydraulic System

Hydraulic Flow - Standard - Hydraulic Power (Calculated)
35.5 HP
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3336 psi
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
3336 psi
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
50.9 HP
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
26 gal/min
Hydraulic Flow - Standard - Loader Hydraulic Flow
18 gal/min

Power Train

Travel Speed - Forward or Reverse - Two Speed Option
11.1 mile/h
Travel Speed - Forward or Reverse - One Speed
7.6 mile/h

Noise Level

Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The so

Shipping

UPC
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equi