Get a Quote

The Cat® 226D3 Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

Cat Specs
Photos
Downloads

Engine

Net Power - ISO 9249
66.5 HP
Gross Power - SAE J1995
67.1 HP
Net Power - SAE 1349
65.8 HP
Bore
3.3 in
Stroke
3.9 in
Displacement
134.3 in²
Engine Model
Cat C2.2 CRDI
Peak Torque - 1,500 rpm - SAE J1995
153 ft·lbf

Operating Specifications

Rated Operating Capacity
1550 lb
Rated Operating Capacity with Optional Counterweight
1650 lb
Tipping Load
3100 lb
Breakout Force - Tilt Cylinder
3927 lb
Note
* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydra

Weights

Operating Weight
5849 lb
Note
* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydra

Dimensions

Length - With Bucket on Ground
127.3 in
Length - Without Bucket
99.4 in
Vehicle Width over Tires
58.9 in
Maximum Overall Height
143.8 in
Bucket Pin Height - Maximum Lift
110.9 in
Bucket Pin Height - Carry Position
8.5 in
Reach - Maximum Lift/Dump
21 in
Clearance at Maximum Lift and Dump
81.8 in
Departure Angle
27.9°
Maximum Dump Angle
46.7°
Rack Back Angle - Maximum Height
88.9°
Height - Top of Cab
79.8 ft
Wheel Base
41.5 ft
Bumper Overhang - Behind Rear Axle
35.2 in
Turning Radius from Center - Machine Rear
59.6 in
Turning Radius from Center - Bucket
77.8 in
Ground Clearance
6.9 ft
Turning Radius from Center - Coupler
43.5 in
Maximum Reach - With Arms Parallel to Ground
50.7 in
Note
* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydra

Service Refill Capacities

Chain Box - Each Side
1.8 gal (US)
Fuel Tank
15.1 gal (US)
Cooling System
3.2 gal (US)
Hydraulic System
11.9 gal (US)
Engine Crankcase
2.6 gal (US)
Hydraulic Tank
9 gal (US)

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I

Hydraulic System

Hydraulic Flow - Standard - Hydraulic Power (Calculated)
33.5 HP
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
26 gal/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3336 psi
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
50.9 HP
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
3336 psi
Hydraulic Flow - Standard - Loader Hydraulic Flow
18 gal/min

Noise Level

Outside Cab***
102 dB(A)
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Inside Cab**
83 dB(A)
Note (2)
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The s
Note (3)
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Power Train

Travel Speed - Forward or Reverse - One Speed
7.6 mile/h
Travel Speed - Forward or Reverse - Two Speed Option
11.1 mile/h

Shipping

UPC
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equi