Weights

Operating Weight

7831 lb

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C0 ca

Engine

Net Power

65.8 HP

Gross Power - SAE J1995

67.1 HP

Net Power - SAE 1349

65.8 HP

Bore

3.3 in

Stroke

3.9 in

Displacement

134.3 in²

Net Power - ISO 9249

66.5 HP

Engine Model

Cat C2.2 CRDI

Peak Torque - 1,500 rpm - SAE J1995

153 ft·lbf

Operating Specifications

Rated Operating Capacities - 35% Tipping Load

1740 lb

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C0 ca

Rated Operating Capacity with Optional Counterweight

2700 lb

Tipping Load

4970 lb

Breakout Force - Tilt Cylinder

3907 lb

Ground Contact Area - With 320 mm/12.6 in Track

1373 in²

Ground Pressure - With 400 mm/15.7 in Track

4.7 psi

Ground Contact Area - With 400 mm/15.7 in Track

1716 in²

Ground Pressure - With 320 mm/12.6 in Track

5.7 psi

Rated Operating Capacities - 50% Tipping Load

2485 lb

Dimensions

Length - Track on Ground

54.5 in

Vehicle Width (400 mm/15.7 in tracks)

69.1 in

Overall Length - Track

71.2 in

Vehicle Width (320 mm/12.6 in tracks)

66 in

Length - With Bucket on Ground

127.3 in

Length - Without Bucket

99.3 in

Maximum Overall Height

150.8 in

Bucket Pin Height - Maximum Lift

118.2 in

Bucket Pin Height - Carry Position

8.6 in

Reach - Maximum Lift/Dump

28.6 in

Clearance at Maximum Lift and Dump

88.7 in

Ground Clearance

7.6 in

Departure Angle

34.5°

Maximum Dump Angle

48°

Rack Back Angle - Maximum Height

87.5°

Height - Top of Cab

80.3 in

Maximum Reach - With Arms Parallel to Ground

51.8 in

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C0 ca

Turning Radius from Center - Coupler

45.7 in

Turning Radius from Center - Machine Rear

57.4 in

Turning Radius from Center - Bucket

81.1 in

Service Refill Capacities

Hydraulic Tank

9 gal (US)

Engine Crankcase

2.6 gal (US)

Cooling System

3.2 gal (US)

Fuel Tank

15.1 gal (US)

Hydraulic System

11.9 gal (US)

Cab

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 Level I

Noise Level

Outside Cab***

103 dB(A)

Inside Cab**

83 dB(A)

Note (1)

Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Note (3)

***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Note (2)

**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The s

Hydraulic System

Hydraulic Flow - High Flow - Loader Hydraulic Pressure

3336 psi

Hydraulic Flow - Standard - Hydraulic Power (Calculated)

35.5 HP

Hydraulic Flow - Standard - Loader Hydraulic Pressure

3336 psi

Hydraulic Flow - High Flow - Hydraulic Power (Calculated)

50.9 HP

Hydraulic Flow - High Flow - Loader Hydraulic Flow

26 gal/min

Hydraulic Flow - Standard - Loader Hydraulic Flow

18 gal/min

Power Train

Travel Speed - Forward or Reverse - One Speed

5 mile/h

Travel Speed - Forward or Reverse - Two Speed

7.6 mile/h

Shipping

UPC

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equi