Get a Quote

The Cat® D3 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and ?nesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.

Cat Specs
Photos
Downloads

Engine

Power - Net
104 HP
Note (1)
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ?ywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Displacement
220 in²
Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 p
Engine Model
Cat® C3.6
Net Power - 2,200 rpm - SAE J1349
104 HP
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
104 HP

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II

Weights

Operating Weight - LGP
21369 lb
Operating Weight - LGP, 762 mm/30 in
21810 lb
Note (2)
For machine with ripper, add 554 kg (1,222 lb).
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.

Service Refill Capacities

Diesel Exhaust Fluid (DEF) Tank
4.9 gal (US)
Cooling System
5 gal (US)
Final Drive - Each - LGP
2.6 gal (US)
Transmission - Hydraulic Tank
23.8 gal (US)
Crankcase - With Filter
2.8 gal (US)
Fuel Tank
51.5 gal (US)

Transmission

Drive Pumps
1
Track Motors
2
Maximum Travel Speed - Forward
5.6 mile/h
Relief Valve Settings
7033 psi
Maximum Travel Speed - Reverse
6.2 mile/h

Hydraulic Controls

Pump Output
17.2 gal/min
Relief Valve Settings
2988 psi

Undercarriage

Track Gauge
63 in
Ground Pressure - LGP
4.5 psi
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
40
Shoe Width - LGP
26 in
Track Gauge - LGP
69 in
Number of Rollers - Each Side
7
Ground Pressure - LGP, 762 mm (30 in)
3.9 psi
Shoe Width - LGP, 762 mm (30 in)
30 in
Length - Track on Ground - LGP
91 in
Track Gauge - LGP, 762 mm (30 in)
73 in
Length - Track on Ground - LGP, 762 mm (30 in)
91 in

Ripper

Type
Parallelogram
Number of Shanks
3
Height
6.5 in
Weight
1222 lb
Overall Width
67.3 in
Maximum Digging Depth
13.3 in
Maximum Ground Clearance Under Tip
17.6 in
Maximum Reach - Ground Line
30.2 in

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the ?uorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equiva

Dimensions

Ground Clearance - LGP, 762 mm (30 in)
13 in
Note
With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
BLADE: Digging Depth - LGP
23.2 in
Ground Clearance - LGP
13 in
BLADE: Blade Width at Maximum Angle - LGP
115.8 in
BLADE: Maximum Tilt - LGP
17.7 in
BLADE: Blade Width - LGP
126.7 in
BLADE: Blade Height - LGP
39.8 in
Track Gauge - LGP
67.9 in
Overall Length - With Blade - LGP, 762 mm (30 in)
169.6 in
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°
BLADE: Maximum Angle (either side) - LGP
25°
Track Gauge - LGP, 762 mm (30 in)
73 in
BLADE: Blade Lift Height - LGP
30.2 in
BLADE: Blade Capacity (SAE) - LGP
3.06 yd³
Overall Length - With Blade - LGP
169.6 in

Shipping

UPC
Hydraulic

Retrieval Winch

Weight
1747 lb
Rope Diameter - Optional
0.75 in
Maximum Line Speed - Bare Drum
50 lb
Drum Capacity - Recommended Cable
277 ft
Maximum Line Pull - Bare Drum
32150 ft/min
Maximum Line Pull - Full Drum
20350 ft/min
Drum Capacity - Optional Cable
195 ft
Speed
Variable
Winch Drive
Hydraulic
Control
Hydraulic
Rope Diameter - Recommended
0.63 in
Maximum Line Speed - Full Drum
79 lb