D2 Dozer
The Cat® D2 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.
Engine
- Power - Net
- 92 hp
- Displacement
- 220 in²
- Note (1)
- Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ?ywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
- Note (2)
- All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 p
- Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
- 92 hp
- Engine Model
- Cat® C3.6
- Net Power - 2,200 rpm - SAE J1349
- 92 hp
Weights
- Operating Weight - LGP
- 19066 lb
- Note (1)
- Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
- Note (2)
- For machine with ripper, add 554 kg (1,222 lb).
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level II
Service Refill Capacities
- Diesel Exhaust Fluid (DEF) Tank
- 4.9 gal (US)
- Crankcase - With Filter
- 2.8 gal (US)
- Transmission - Hydraulic Tank
- 23.8 gal (US)
- Final Drive - Each - LGP
- 2.6 gal (US)
- Fuel Tank
- 51.5 gal (US)
- Cooling System
- 5 gal (US)
Transmission
- Drive Pumps
- 1
- Maximum Travel Speed - Reverse
- 6.2 mile/h
- Maximum Travel Speed - Forward
- 5.6 mile/h
- Track Motors
- 2
- Relief Valve Settings
- 7033 psi
Undercarriage
- Track Gauge
- 61 ft
- Length - Track on Ground - LGP
- 89 in
- Track Gauge - LGP
- 68 in
- Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
- 43
- Ground Pressure - LGP
- 4.3 psi
- Number of Rollers - Each Side
- 7
- Shoe Width - LGP
- 25 in
Hydraulic Controls
- Pump Output
- 17.2 gal/min
- Relief Valve Settings
- 2988 psi
Ripper
- Type
- Parallelogram
- Number of Shanks
- 3
- Height
- 6.5 in
- Weight
- 1222 lb
- Maximum Digging Depth
- 13.3 in
- Maximum Reach - Ground Line
- 30.2 in
- Maximum Ground Clearance Under Tip
- 17.6 in
- Overall Width
- 67.3 in
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the ?uorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equiva
Dimensions
- BLADE: Digging Depth - LGP
- 23.2 in
- Overall Length - With Blade - LGP
- 168.2 in
- BLADE: Blade Width - LGP
- 124 in
- BLADE: Maximum Angle (either side) - LGP
- 25°
- Ground Clearance - LGP
- 13 in
- BLADE: Blade Cutting Edge Angle, Adjustable - LGP
- 52° to 58°
- BLADE: Blade Capacity (SAE) - LGP
- 2.42 yd³
- BLADE: Blade Width at Maximum Angle - LGP
- 113.1 in
- Note
- With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
- BLADE: Blade Height - LGP
- 35.8 in
- BLADE: Blade Lift Height - LGP
- 27.9 in
- BLADE: Maximum Tilt - LGP
- 17.2 in
- Track Gauge - LGP
- 67.9 in
Shipping
- UPC
- Hydrostatic
Retrieval Winch
- Drum Capacity - Optional Cable
- 195 ft
- Control
- Hydraulic
- Rope Diameter - Optional
- 0.75 in
- Maximum Line Speed - Bare Drum
- 50 lb
- Speed
- Variable
- Rope Diameter - Recommended
- 0.63 in
- Drum Capacity - Recommended Cable
- 277 ft
- Weight
- 1747 lb
- Maximum Line Pull - Bare Drum
- 32150 ft/min
- Winch Drive
- Hydraulic
- Maximum Line Speed - Full Drum
- 79 lb
- Maximum Line Pull - Full Drum
- 20350 ft/min
