Get a Quote

The new Cat® D1 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and ?nesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.

Cat Specs
Photos
Downloads

Engine

Power - Net
80 HP
Displacement
220 in²
Note (1)
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ?ywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Engine Model
Cat C3.6
Net Power - 2,200 rpm - SAE J1349
80 HP
Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 p
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
80 HP

Weights

Operating Weight - LGP
18839 lb
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Operating Weight - LGP, 762 mm/30 in
19295 lb
Note (2)
For machine with ripper, add 554 kg (1,222 lb).

Transmission

Drive Pumps
1
Maximum Travel Speed - Forward
5.6 mile/h
Maximum Travel Speed - Reverse
6.2 mile/h
Track Motors
2
Relief Valve Settings
7033 psi

Hydraulic Controls

Pump Output
17.2 gal/min
Relief Valve Settings
2988 psi

Winch

Weight
1345 lb
Winch Drive
Hydrostatic
Control
Hydraulic
Speed
Variable
Maximum Line Speed - Full Drum
207 ft/min
Drum Diameter
10 in
Maximum Line Speed - Bare Drum
131 ft/min
Overall Width
29.2 in
Drum Capacity - Recommended Cable
371 ft
Rope Diameter - Optional
0.75 in
Winch Length
27.76 in
Rope Diameter - Recommended
0.63 in
Drum Capacity - Optional Cable
256 ft
Maximum Line Pull - Bare Drum
40000 lb
Maximum Line Pull - Full Drum
25000 lb
Throat Clearance
6.75 in
Drum Width
10.8 in

Undercarriage

Track Gauge
59 in
Ground Pressure - LGP
4.3 psi
Ground Pressure - LGP, 762 mm (30 in)
3.7 psi
Length - Track on Ground - LGP, 762 mm (30 in)
89 in
Shoe Width - LGP, 762 mm (30 in)
30 in
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
43
Length - Track on Ground - LGP
89 in
Track Gauge - LGP, 762 mm (30 in)
73 in
Track Gauge - LGP
68 in
Number of Rollers - Each Side
6
Shoe Width - LGP
25 in

Ripper

Type
Parallelogram
Number of Shanks
3
Height
6.5 in
Weight
1222 lb
Maximum Digging Depth
13.3 in
Overall Width
67.3 in
Maximum Ground Clearance Under Tip
17.6 in
Maximum Reach - Ground Line
30.2 in

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the ?uorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equiva

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II

Service Refill Capacities

Fuel Tank
51.5 gal (US)
Final Drive - Each - LGP
2.6 gal (US)
Transmission - Hydraulic Tank
23.8 gal (US)
Cooling System
4.2 gal (US)
Crankcase - With Filter
2.8 gal (US)
Diesel Exhaust Fluid (DEF) Tank
4.9 gal (US)

Dimensions

BLADE: Blade Lift Height - LGP
28.7 in
Track Gauge - LGP
67.9 in
Tractor Height - LGP, 762 mm (30 in)
108.9 in
BLADE: Maximum Angle (either side) - Intermediate
25°
BLADE: Blade Width - LGP
124 in
BLADE: Blade Height - LGP
33.8 in
Length - Basic Tractor - Without Blade - LGP
129.6 in
Note
*Abrasion Undercarriage
Width - Tractor - Standard Shoes - No Blade - LGP (762 mm/30 in)
94.9 in
BLADE: Digging Depth - LGP
22.5 in
BLADE: Blade Height - Intermediate
33.9 in
BLADE: Maximum Tilt - Intermediate
17.7 in
Length - Basic Tractor - Without Blade - LGP, 762 mm (30 in)
129.6 in
Ground Clearance - LGP, 762 mm (30 in)
13 in
BLADE: Maximum Angle (either side) - LGP
25°
Tractor Height - LGP
108.9 in
Ground Clearance - LGP
13 in
Overall Length - With Blade - LGP, 762 mm (30 in)
167.8 in
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate
52° to 58°
BLADE: Blade Capacity (SAE) - LGP
2.17 yd³
BLADE: Blade Lift Height - Intermediate
29.3 in
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°
BLADE: Blade Width - Intermediate
115 in
BLADE: Maximum Tilt - LGP
17.2 in
Width - Tractor - Standard Shoes - No Blade - LGP
92.9 in
BLADE: Blade Capacity (SAE) - Intermediate
1.96 yd³
Overall Length - With Blade - LGP
167.8 in
BLADE: Digging Depth - Intermediate
22.5 in
BLADE: Blade Width at Maximum Angle - LGP
113.1 in
Track Gauge - LGP, 762 mm (30 in)
73 in
BLADE: Blade Width at Maximum Angle - Intermediate
105.1 in

Shipping

UPC
168