Get a Quote

The new Cat® D11 Dozer delivers higher productivity at lower cost. The latest technology provides operator with full command of the dozer for safe and efficient operation. This means you can comfortably move more material in less time, at a lower cost per ton, for a faster payback on your investment. This intelligent dozer has a sophisticated machine protection strategy, as well as a machine guidance system which further drives higher productivity and lower cost.

Cat Specs


Flywheel Power
850 HP
U.S. EPA Tier 4 Final/ EU Stage IV/ Korea Tier 4 Final
Note (1)
All nonroad Tier 4 Final, Stage IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended
Note (2)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
928 in²
Engine Model
Cat C32


Operating Weight
229800 lb
Shipping Weight
86200 lb
Trip Edge Type
Engine ratings apply at 1,800 rpm.


1 Forward
2.2 mile/h
2 Forward
4.1 mile/h
3 Forward
7 mile/h
2 Reverse
4 mile/h
3 Reverse
7.3 mile/h


Length - Track on Ground
126.2 in
Note (2)
**When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm/3.2 in.
Ground Clearance
24.1 ft
Note (1)
* Add the following measurements for attachments: Ripper (single shank) 1519 mm/59.8 in; Ripper (multi-shank) 1613 mm/63.5 in; Drawbar 406 mm/16.0 in; SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in
Width - Without Trunnions - Standard Shoe
106 in
Length - Basic Tractor - With Drawbar
183 in

Service Refill Capacities

Fuel Tank
165 gal (US)