Get a Quote

The Cat® 725 features a world-class cab design, re-engineered using global operator feedback to advance comfort and ease of operation. Enhancements include new controls, transmission-protection features, hoist-assist system, advanced automatic traction control system, automatic retarder control, stability-assist machine rollover warning system, and a fuel saving ECO mode.

Cat Specs
Photos
Downloads

Engine

Gross Power - SAE J1995
342 HP
Emissions
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
Net Power - SAE J1349
334 HP
Net Power - ISO 14396
338 HP
Bore
4.5 in
Stroke
45.2 in
Displacement
567.5 in²
Peak Engine Torque Speed
1200 r/min
Note (3)
Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions.
Peak Engine Torque Net (SAE J1349)
1263 ft·lbf
Peak Engine Torque Gross (SAE J1995)
1275 ft·lbf
Note (1)
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV
Cat® C9.3
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (4)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, in
No Engine De-rating Below
3000 ft
Engine Model
Cat C9.3

Weights

Rated Payload
26.5 ton (US)

Body Capacities

Heaped (SAE 2:1)
19.6 yd³
Struck
14.4 yd³
Tailgate Heaped SAE 2:1
20.4 yd³
Tailgate Struck
14.5 yd³

Service Refill Capacities

Final Drive - Each
1.6 gal (US)
Final Drives/Differential
33 gal (US)
Output Transfer Gear Box
5 gal (US)
Transmission
10 gal (US)
Steering/Hoist Hydraulic System
24 gal (US)
Cooling System
18 gal (US)
DEF Tank
4 gal (US)
Hydraulic System
29.1 gal (US)
Fuel Tank
91 gal (US)
Engine Crankcase
8 gal (US)

Transmission

Forward - 1
5 mile/h
Forward - 2
9.4 mile/h
Forward - 5
30.7 mile/h
Forward - 6
36.3 mile/h
Reverse - 1
5.5 mile/h
Forward - 3
14.4 mile/h
Forward - 4
22.1 mile/h

Sound Levels

Interior Cab
69 dB(A)
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Note (1)
The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans

Body Hoist

Raise Time
10 s
Lower Time
8 s

Standards

Brakes
ISO 3450 – 2011
Cab - FOPS
ISO 3449 Level II – 2008
Cab - ROPS
ISO 3471 – 2008
Steering
ISO 5010 – 2007

Operating Weights

Total - Empty
50975 lb
Rear Axle - Empty
9757 lb
Front Axle - Rated Load
5511 lb
Total - Loaded
103886 lb
Rear Axle - Loaded
33457 lb
Total - Rated Load
52910 lb
Front Axle - Empty
30974 lb
Center Axle - Rated Load
23699 lb
Rear Axle - Rated Load
23699 lb
Front Axle - Loaded
36484 lb
Center Axle - Loaded
33944 lb
Center Axle - Empty
10242 lb

Shipping

UPC
4-5

Turning Circle

Turning Dimensions - Aisle Width
210 in
Turning Dimensions - Steer Angle - Left/Right
45°
Turning Dimensions - SAE Turning Radius
294 in
Note
Dimensions are for machines equipped with 23.5R25 tires.
Turning Dimensions - Inside Radius
153 in
Turning Dimensions - Clearance Radius
318 in

Body Plate

Type
High strength Brinell HB450 wear resistant steel

Steering

Lock to Lock
4.75 seconds @ 60 rpm