Get a Quote
There is currently no image for this product.
Cat® C13 ACERT™ Diesel Engine
Get A Quote

The Cat® C13 ACERT™ Industrial Diesel Engine is offered in ratings ranging from 287-388 bkW (385-520 bhp) @ 1800-2100 rpm. Industries and applications powered by C13 ACERT engines include: Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Specialty Ag Equipment, Surface Hauling Equipment, Trenchers and Underground Mining Equipment.

Specifications
Standard Equipment

General

Engine Configuration
In-Line 6, 4-Stroke-Cycle Diesel
Bore
130 mm (5.1 in)
Stroke
157 mm (6.2 in)
Displacement
12.5 L (762.8 in³)
Aspiration
Turbocharged-Aftercooled (TA)
Compression Ratio
17.0:1
Combustion System
Direct Injection
Rotation (from flywheel end)
Counterclockwise
Cooling System Capacity
18.7 L (19.8 qt)
Lube System (refill)
34 L (35.9 qt)

PETU Dimensions (Tier 4 Final, Stage IV Only)

Length
854 mm (33.6 in)
Width
287 mm (11.3 in)
Volume Capacity
48.4 L (51.1 qt)
Weight
19.42 kg (42.8 lb)
Height
551 mm (21.7 in)

Power Rating

Minimum Power
385.0 bhp
Maximum Power
520.0 bhp
Frequency
1800-2100 rpm

Emission Standards

Emissions
U.S. EPA Tier 4 Final Nonroad, EU Stage IV Nonroad, U.S. EPA Tier 4 Interim Nonroad Equivalent (Not Currently EPA Certified) and EU Stage IIIB Nonroad Equivalent (Non-Current for EU) Emission Standar

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length
1203-1272 mm (47.2-50.1 in)
Width
933-996 mm (36.74-39.2 in)
Height
1132-1186 mm (44.6-46.7 in)
Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
1143-1350 kg (2520-2976 lb)

Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

Length
1053-1077 mm (41.5-42.4 in)
Width
779.8-1069 mm (30.7-42.1 in)
Height
451.3-654 mm (17.8-25.7 in)
Weight
248-259 kg (547-571 lb)
Diameter
330.2 mm (13 in)
  • Air Inlet System
  • Control System
  • Cooling System
  • Flywheels and Flywheel Housing
  • Fuel System
  • Lube System
  • Power Take Off (PTO)
  • General
  • U.S. EPA Tier 4 Interim, EU Stage IIIB Aftertreatment / Clean Emissions Control Equipment
  • U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment