Get a Quote
Cat Specs
Photos
Downloads

Engine

Net Power
97 HP
Maximum Gross Power
100 HP
Bore
4.13 in
Stroke
5 in
Displacement
268 in³
Maximum Gross Power - Maximum Engine Speed
2350 r/min
Maximum Gross Torque - SAE J1995
336 ft·lbf
Rated Net Power - SAE J1349
96 HP
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - ISO 14396
100 HP
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Power - SAE J1995
102 HP
Maximum Net Torque - ISO 9249
329 ft·lbf
Rated Net Power - ISO 9249
97 HP
Maximum Gross Power - ISO 14396 (DIN)
101 HP
Maximum Gross Torque - ISO 14396
332 ft·lbf
Rated Net Power - Rated Engine Speed
2200 r/min
Maximum Net Torque - SAE J1349
325 ft·lbf
Engine Model
Cat C4.4 ACERT�
Rated Net Power - ISO 9249 (DIN)
98 HP

Weights

Operating Weight
19315 lb

Buckets

Bucket Capacities
1.3-1.9 m3 (1.7-2.5 yd3)

Axles

Front
Fixed; Locking differential (standard)
Rear
Oscillating �11 degrees; Locking differential (Standard)

Service Refill Capacities

Cooling System
5.7 gal (US)
Transmission
0.9 gal (US)
Hydraulic System - Including Tank
25.9 gal (US)
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Fuel Tank
40.7 gal (US)
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
Engine Crankcase
2.3 gal (US)
Hydraulic Tank
14.5 gal (US)

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).

Loader Hydraulic System

Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7 s
Relief Pressure - Tilt Cylinder
4931 psi
Hydraulic Cycle Time - Total Cycle Time
12.5 s
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
24 gal/min
Hydraulic Cycle Time - Rackback
2.2 s
Maximum Flow - Implement Pump
39 gal/min
Hydraulic Cycle Time - Dump, at Maximum Reach
1.4 s
Maximum Working Pressure - Implement Pump
4061 psi
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2 s
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
32 gal/min

Tires

Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Other Choices Include
17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
Note (2)
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Standard Size
17.5-25 12PR
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Steering

Maximum Working Pressure - Steering Pump
3263 psi
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
2.8 s
Maximum Flow - Steering Pump
22 gal/min

Transmission

Forward and Reverse - Low Range, Speed Range 1*
6.3 mile/h
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - High Range
25 mile/h

Operating Specifications

Rated Bucket Capacity
2.5 yd³