Get a Quote
910M Compact Wheel Loader 360
910M Compact Wheel Loader
Get A Quote


Maximum Gross Power
100 HP
Net Power
97 HP
4.13 in
5 in
268 in³
Maximum Gross Power - ISO 14396 (DIN)
101 HP
Maximum Gross Torque - ISO 14396
332 ft·lbf
Rated Net Power - Rated Engine Speed
2200 r/min
Maximum Net Torque - SAE J1349
325 ft·lbf
Engine Model
Cat C4.4 ACERT�
Rated Net Power - ISO 9249 (DIN)
98 HP
Maximum Gross Power - Maximum Engine Speed
2350 r/min
Maximum Gross Torque - SAE J1995
336 ft·lbf
Rated Net Power - SAE J1349
96 HP
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - ISO 14396
100 HP
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Power - SAE J1995
102 HP
Maximum Net Torque - ISO 9249
329 ft·lbf
Rated Net Power - ISO 9249
97 HP


Operating Weight
17893 lb


Bucket Capacities
1.3 m3-1.9 m3 (1.7 yd3-2.5 yd3)


Fixed; Locking differential (standard)
Oscillating �11 degrees; Locking differential (Standard)

Service Refill Capacities

Cooling System
5.7 gal (US)
0.9 gal (US)
Engine Crankcase
2.3 gal (US)
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
Hydraulic System - Including Tank
25.9 gal (US)
Hydraulic Tank
14.5 gal (US)
Fuel Tank
40.7 gal (US)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.


ISO 3471:2008
ISO 3449:2005 Level II
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).

Loader Hydraulic System

Hydraulic Cycle Time - Dump, at Maximum Reach
1.4 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2 s
Maximum Working Pressure - Implement Pump
3408 psi
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7 s
Hydraulic Cycle Time - Total Cycle Time
12.5 s
Relief Pressure - Tilt Cylinder
4931 psi
Hydraulic Cycle Time - Rackback
2.2 s
Maximum Flow - Implement Pump
32 gal/min


Note (2)
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Standard Size
15.5-25 12PR
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Other Choices Include
15.5-R25; 17.5-25 12PR; 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�


Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
3.2 s
Maximum Flow - Steering Pump
17 gal/min
Maximum Working Pressure - Steering Pump
2683 psi


*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - High Range
25 mile/h
Forward and Reverse - Low Range, Speed Range 1*
6.3 mile/h

Operating Specifications

Rated Bucket Capacity
2.5 yd³