Get a Quote

The Cat® 226D Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

Cat Specs
Photos
Downloads

Engine

Net Flywheel Power
65.8 HP
Net Power - SAE 1349
65.8 HP
Bore
3.3 in
Stroke
3.9 in
Displacement
134.3 in³
Engine Model
Cat C2.2 CRDI
Peak Torque - 1,500 rpm - SAE J1995
153 ft·lbf
Net Power - ISO 9249
66.5 HP
Gross Power - SAE J1995
67.1 HP

Weights

Operating Weight
5705 lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0

Operating Specifications

Rated Operating Capacity
1550 lb
Tipping Load
3100 lb
Breakout Force - Tilt Cylinder
3983 lb
Rated Operating Capacity with Optional Counterweight
1650 lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0

Dimensions

Vehicle Width over Tires
58.9 in
Departure Angle
27.9°
Maximum Dump Angle
46.7°
Height - Top of Cab
79.8 in
Wheel Base
41.5 in
Bucket Pin Height - Maximum Lift
110.9 in
Reach - Maximum Lift/Dump
21 in
Length - With Bucket on Ground
127.3 in
Turning Radius from Center - Machine Rear
59.6 in
Maximum Reach - With Arms Parallel to Ground
50.7 in
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0
Bumper Overhang - Behind Rear Axle
35.2 in
Turning Radius from Center - Bucket
77.8 in
Length - Without Bucket
99.4 in
Ground Clearance
6.9 ft
Bucket Pin Height - Carry Position
8.5 in
Rack Back Angle - Maximum Height
88.9°
Clearance at Maximum Lift and Dump
81.8 in
Turning Radius from Center - Coupler
43.5 in
Maximum Overall Height
143.8 in

Cab

FOPS Level II
ISO 3449:2005 Level II
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I

Service Refill Capacities

Cooling System
3.2 gal (US)
Engine Crankcase
2.6 gal (US)
Hydraulic Tank
9 gal (US)
Fuel Tank
15.1 gal (US)
Chain Box - Each Side
1.8 gal (US)
Hydraulic System
11.9 gal (US)

Hydraulic System

Hydraulic Flow - Standard - Loader Hydraulic Flow
18 gal/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
3336 psi
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3336 psi
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
50.9 HP
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
35.5 HP
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
26 gal/min

Noise Level

Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Outside Cab**
102 dB(A)
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The so
Inside Cab*
83 dB(A)
Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Power Train

Travel Speed - Forward or Reverse - Two Speed Option
11.1 mile/h
Travel Speed - Forward or Reverse - One Speed
7.6 mile/h

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equi