Get a Quote

From pushing trash to spreading cover, and cell construction to closing, Cat® Waste Handlers are designed and manufactured from the frame up to take on the demands of landfill work.

Cat Specs
Photos
Downloads

Weights

Operating Weight
40818 lb
Operating Weight - XL Waste Handler
40818 lb
Shipping Weight - LGP Waste Handler
43642 lb
Operating Weight - LGP Waste Handler
44749 lb
Shipping Weight - XL Waste Handler
40029 lb

Engine

Bore
4.1 in
Stroke
5.3 in
Note (1)
All non road Tier 4, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (EPA), 10 ppm (EU) (mg/kg) sulfur or less.
Displacement
433 in³
Note (2)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Note (3)
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equiv
Engine Model
Cat C7.1 ACERT™
Net Power - Maximum - SAE J1995 at 2,200 rpm
182 HP
Net Power - 1,800 rpm - ISO 9249/SAE J1349 (DIN)
168 HP
Flywheel Power
182 HP
Emissions
Tier 4 Final/Stage IV/Korea Tier 4 Final
Net Power - Maximum - ISO 14396 at 2,200 rpm
178 HP
Net Power - Maximum - ISO 14396 (DIN) at 2,200 rpm
180 HP
Net Power - 1,800 rpm - ISO 9249/SAE J1349
166 HP

Blades - Capacity (SAE J1265)

LGP VPAT
5.1 yd³
XL SU
5.6 yd³
LGP VPAT - Landfill*
7.39 yd³
XL VPAT
4.3 yd³
Note
*Blade capacity with trash rack.
XL VPAT Landfill*
8.29 yd³

Blades - Width - Over End Bits

Note
*Blade capacity with trash rack.
XL VPAT Landfill*
10.23 ft
LGP VPAT
13.38 ft
XL SU
10.33 ft
LGP VPAT - Landfill*
12.89 ft
XL VPAT
10.75 ft

Transmission

1.7 Reverse
3.7 mile/h
0.7 Forward
1.7 mile/h
2.7 Forward
5.2 mile/h
1.5 Reverse
3.4 mile/h
0.5 Forward
1.6 mile/h
2.5 Forward
4.7 mile/h
0.7 Reverse
2.1 mile/h
2.7 Reverse
6.5 mile/h
1.7 Forward
3 mile/h
0.5 Reverse
1.9 mile/h
2.5 Reverse
5.9 mile/h
1.5 Forward
2.7 mile/h
1.0 Forward
2.1 mile/h
2.0 Forward
3.6 mile/h
3.0 Forward
6.1 mile/h
1.0 Reverse
2.5 mile/h
2.0 Reverse
4.4 mile/h
3.0 Reverse
7.6 mile/h

Dimensions - LGP

Height - Grouser
2.2 in
Machine Height - Grouser Tip - Exhaust Stack
126.9 in
Ground Clearance
18.8 in
Width - Tractor - Without Trunnions
118 in
Length - Basic Tractor - With Drawbar*
166.2 in
Note
*Add 957 mm (37.7 in) to length of basic tractor (with drawbar) with ripper (with tip at ground line).
Ground Pressure
4.5 psi
Length - Track on Ground
122.7 in
Track Gauge
85 in

Dimensions - XL

Ground Pressure
6.7 psi
Length - Track on Ground
101.6 in
Track Gauge
74.4 in
Height - Grouser
2.6 in
Machine Height - Grouser Tip - Exhaust Stack
122.4 in
Ground Clearance
14.3 in
Width - Tractor - Without Trunnions
98.4 in
Length - Basic Tractor - With Drawbar*
157.3 in
Note
*Add 1185 mm (46.7 in) to length of basic tractor (with drawbar) with SU blade added. Add 957 mm (37.7 in) to length of basic tractor (with drawbar) with ripper (with tip at ground line).