Get a Quote
There is currently no image for this product. 360
D4K2 Track-Type Tractor
Get A Quote
Specifications
Features
Standard Equipment

Service Refill Capacities

Fuel tank
51.5 gal
Crankcase and filter
2.91 gal
Final drives, XL (each side)
2.6 gal
Final drives, LGP (each side)
2.6 gal
Cooling system
5.92 gal
Transmission/hydraulic tank
15.7 gal

Winch

Weight
1345 lb
Winch Drive
Hydrostatic
Control
Hydraulic
Speed
Variable
Winch length
27.76 in
Overall width
29.2 in
Drum diameter
10 in
Drum width
10.8 in
Throat clearance
6.75 in
Rope diameter - recommended
0.63 in
Rope diameter - optional
0.75 in
Drum capacity - recommended cable
371 ft
Drum capacity - optional cable
256 ft
Maximum line pull - bare drum
40000 lb
Maximum line pull - full drum
25000 lb
Maximum line speed - bare drum
131 ft/min
Maximum line speed - full drum
207 ft/min

Transmission

Drive Pumps
1
Track motors
2
Relief valve settings
7033 psi
Maximum travel speed - forward
5.6 mph
Maximum travel speed - reverse
6.2 mph

Hydraulic Controls

Pump Output
17.7 gal/min
Relief valve setting
2988 psi

Undercarriage

Shoe width - XL
18 in
Shoe width - LGP
25 in
Length of track on ground - XL
89 in
Length of track on ground - LGP
89 in
Track gauge - XL
61 in
Track gauge - LGP
68 in
Ground contact area - XL
3206 in2
Ground contact area - LGP
4425 in2
Ground pressure - XL
5.6 psi
Ground pressure - LGP
4.2 psi

Engine

Engine Model
Cat C4.4 ACERT
Power - Net
92 hp
Displacement
269 in3
ISO 9249
92 hp
EEC 80/1269
92 hp
SAE J1349
Engine meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission standards. hp
Bore
4.13 in
Stroke
5 in

Weights

Operating Weight - XL
18007 lb
Operating Weight - LGP
18686 lb

Ripper

Type
Parallelogram
Number of Shanks
3
Maximum digging depth
13.3 in
Maximum reach at ground line
23.5 in
Maximum ground clearance under tip
17.6 in
Overall width
67.3 in
Height
6.5 in
Weight
1222 lb
Features:

Features:

Slope Indicate

New grade control feature provides you slope of blade in cross slope direction and mainfall (fore/aft) direction without having to estimate.

Slope Assist

New optional grade control feature which helps you more easily achieve the desired blade mainfall and cross slope automatically.

Stable Blade

New blade control feature helps you obtain a finish grade with less operator effort.

Traction Control

New traction control feature reduces track slip and undercarriage wear for lower operating costs.

Eco Mode

New engine throttle settings reduce fuel consumption up to 25% to save you more money.

Heated and Ventilated Seat

Experience a new level of comfort in all climates with the new optional heated and ventilated air suspension seat.

Power Pitch Blade

This option lets the operator easily adjust the blade pitch to optimize productivity.

Engine

Cat® C4.4 ACERT™ diesel engine meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards.

Heated, Seat-Mounted Controls

Heated joysticks (optional) offer even greater comfort in cold climates.

AccuGrade™

Optional grade control system enables operators to cut and fill to grade with increased accuracy, minimizing the need for traditional stakes and grade checkers. Large AccuGrade monitor is built into the machine’s dash for easy viewing during operation.

Undercarriage

Choice of undercarriage to give you the lowest costs per hour. Select either the standard sealed and lubricated track (SALT) undercarriage or the innovative SystemOne™ undercarriage.

  • ELECTRICAL
  • OPERATOR STATION
  • HYDRAULICS
  • POWER TRAIN
  • UNDERCARRIAGE
  • OTHER STANDARD EQUIPMENT
  • ANTIFREEZE