Get a Quote

The Cat 287D Multi Terrain Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its standard, suspended undercarriage system provides superior traction, flotation, speed and ride quality with very low ground pressure and minimal ground disturbance across a wide range of underfoot conditions.

Cat Specs
Photos
Downloads

Engine

Gross Power
74.3 HP
Net Power
72.9 HP
Net Power - SAE 1349
72.9 HP
Bore
3.7 in
Stroke
4.7 in
Displacement
203 in³
Engine Model
Cat C3.3B DIT (turbo)
Net Power - ISO 9249
73.7 HP
Gross Power - SAE J1995
74.3 HP
Peak Torque - 1,500 rpm - SAE J1995
195 ft·lbf

Weights

Operating Weight
9929 lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1981 mm (78 in) dirt bucket, standard flow hydraulics, mechanical suspensi

Operating Specifications

Tipping Load
8000 lb
Breakout Force - Tilt Cylinder
7291 lb
Ground Contact Area
2561 in²
Ground Pressure
3.9 psi
Rated Operating Capacities - 50% Tipping Load
4000 lb
Rated Operating Capacity with Optional Counterweight
4250 lb
Rated Operating Capacities - 35% Tipping Load
2800 lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1981 mm (78 in) dirt bucket, standard flow hydraulics, mechanical suspensi

Dimensions

Departure Angle
38°
Maximum Dump Angle
51°
Overall Length - Track
90 in
Vehicle Width
78 in
Height - Top of Cab
83.2 in
Length - With Bucket on Ground
146.2 in
Turning Radius from Center - Machine Rear
67.4 in
Maximum Reach - With Arms Parallel to Ground
50.9 in
Bucket Pin Reach - Maximum Lift
15.4 in
Turning Radius from Center - Bucket
92 in
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1981 mm (78 in) dirt bucket, standard flow hydraulics, mechanical suspensi
Ground Clearance
8.9 ft
Length - Without Bucket
117.9 in
Bucket Pin Height - Carry Position
7.5 in
Rack Back Angle - Maximum Height
84°
Clearance at Maximum Lift and Dump
94 in
Turning Radius from Center - Coupler
58.8 in
Maximum Overall Height
158.1 in
Bucket Pin Height - Maximum Lift
125.1 in
Reach - Maximum Lift/Dump
30.8 in
Length - Track on Ground
71.1 in

Cab

FOPS Level II
ISO 3449:2005 Level II
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I

Service Refill Capacities

Cooling System
3.7 gal (US)
Hydraulic System
13.7 gal (US)
Engine Crankcase
3 gal (US)
Hydraulic Tank
10.3 gal (US)
Fuel Tank
24.8 gal (US)

Noise Level

Inside Cab**
81 dB(A)
Note (3)
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Outside Cab***
103 dB(A)
Note (2)
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The s

Hydraulic System

Hydraulic Flow - Standard - Loader Hydraulic Pressure
3335 psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
44 HP
Hydraulic Flow - Standard - Loader Hydraulic Flow
23 gal/min

Power Train

Travel Speed - Forward or Reverse - One Speed
5.2 mile/h

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equiv