Get a Quote

The Cat 277D Multi Terrain Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power. Its standard, suspended undercarriage system provides superior traction, flotation, speed and ride quality with very low ground pressure and minimal ground disturbance across a wide range of underfoot conditions.

Cat Specs
Photos
Downloads

Engine

Gross Power
74.3 HP
Net Power
72.9 HP
Net Power - SAE 1349
72.9 HP
Bore
3.7 in
Stroke
4.7 in
Displacement
203 in³
Peak Torque - 1,500 rpm - SAE J1995
195 ft·lbf
Engine Model
Cat C3.3B DIT (turbo)
Net Power - ISO 9249
73.7 HP
Gross Power - SAE J1995
74.3 HP

Weights

Operating Weight
9293 lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1981 mm (78 in) dirt bucket, standard flow hydraulics, mechanical suspensi

Operating Specifications

Tipping Load
6580 lb
Breakout Force - Tilt Cylinder
7285 lb
Ground Contact Area
2561 in²
Ground Pressure
3.6 psi
Rated Operating Capacities - 50% Tipping Load
3290 lb
Rated Operating Capacity with Optional Counterweight
3540 lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1981 mm (78 in) dirt bucket, standard flow hydraulics, mechanical suspensi
Rated Operating Capacities - 35% Tipping Load
2303 lb

Dimensions

Departure Angle
38°
Maximum Dump Angle
39°
Overall Length - Track
90 in
Vehicle Width
78 in
Height - Top of Cab
83.2 in
Clearance at Maximum Lift and Dump
97.9 in
Turning Radius from Center - Coupler
58.8 in
Ground Clearance
8.9 ft
Maximum Overall Height
159.5 in
Bucket Pin Height - Carry Position
8 in
Reach - Maximum Lift/Dump
23.5 in
Length - With Bucket on Ground
146.2 in
Turning Radius from Center - Machine Rear
67.4 in
Maximum Reach - With Arms Parallel to Ground
54.9 in
Bucket Pin Height - Maximum Lift
125 in
Turning Radius from Center - Bucket
92 in
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1981 mm (78 in) dirt bucket, standard flow hydraulics, mechanical suspensi
Length - Without Bucket
117.9 in
Rack Back Angle - Maximum Height
94°
Length - Track on Ground
71.1 in

Cab

FOPS Level II
ISO 3449:2005 Level II
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I

Service Refill Capacities

Cooling System
3.7 gal (US)
Fuel Tank
24.8 gal (US)
Hydraulic System
13.7 gal (US)
Engine Crankcase
3 gal (US)
Hydraulic Tank
10.3 gal (US)

Power Train

Travel Speed - Forward or Reverse - One Speed
5.2 mile/h

Hydraulic System

Hydraulic Flow - Standard - Loader Hydraulic Flow
23 gal/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3335 psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
44 HP

Noise Level

Note (2)
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The s
Inside Cab**
81 dB(A)
Note (3)
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Outside Cab***
103 dB(A)

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equiv