Get a Quote

Experience the new Cat 416F2 Backhoe Loader with features including spacious operator station, optional pilot controls, superior durability and outstanding performance. Safely operate on the job site with quieter hydraulics, increased visibility, and the ability to have four wheel braking engaged without wearing on tires or drive train.

Cat Specs
Photos
Downloads

Backhoe

Dig Depth - Standard
14.3 ft
Dig Depth - E-Stick Extended
17.9 ft

Weights

Operating Weight - Maximum
24251 lb
Cab - ROPS/FOPS
359 lb
Four Wheel Drive
392 lb
Air Conditioning
101 lb
Counterweights - Option 1
255 lb
Counterweights - Option 2
530 lb
Counterweights - Option 3
1015 lb
Extendible Stick
659 lb
Operating Weight - Minimum
15904 lb
MP Bucket (0.96 m3/1.25 yd3) - No Forks or Teeth
1642 lb
Operating Weight - Maximum - ROPS Capacity
24251 lb

Engine

Bore
4.13 in
Stroke
5 in
Displacement
268 in³
Rated Net Power - 2,200 rpm - EEC 80/1269
88 HP
Gross Power - SAE J1995
95 HP
Net Peak Power - 1,800 rpm - SAE J1349
106 HP
Note
Engine meets U.S. EPA Tier 4 Final emission standards.
Engine Model
Cat® C4.4 ACERT™
Rated Net Power - 2,200 rpm - ISO 9249
88 HP
Rated Net Power - ISO 9249
88 HP
Net Peak Power - 1,800 rpm - EEC 80/1269
107 HP
Net Torque Rise - 1,400 rpm - SAE J1349
56% %
Gross Power - ISO 14396
94 HP
Rated Net Power - 2,200 rpm - SAE J1349
87 HP
Rated Net Power - SAE J1349
87 HP
Net Power - SAE J1349
87 HP
Net Peak Power - 1,800 rpm - ISO 9249
107 HP
Net Peak Torque - 1,400 rpm
323 ft-lb

Hydraulic System

Type
Closed Center
Pump Type
Variable Flow, Axial Piston
Pump Capacity at 2,200 rpm
35 gal/min
System Pressure - Backhoe
3336 psi
System Pressure - Loader
3336 psi

Standards

Brakes
SAE J/ISO 3450; ISO 3450 1996
Cab - ROPS
SAE J1040 MAY94; ISO 3741 1994
Cab - Sound
ANSI/SAE J1166 OCT98 is 79 dB(A)
Cab - FOPS
SAE J/ISO 3449 APR98 LEVEL II and ISO 3449: 1992 LEVEL II
Exterior Sound
SAE J188 JUN86 is 76 dB(A)

Service Refill Capacities

Fuel Tank
42 gal (US)
Rear Axle - Planetaries
0.4 gal (US)
Hydraulic Tank
10.6 gal (US)
Front Axle (4WD)
2.9 gal (US)
Hydraulic System
23.8 gal (US)
Transmission - Power Shuttle - 2WD
4 gal (US)
Cooling System with Air Conditioning
5.8 gal (US)
Front Axle (4WD) - Planetaries
0.2 gal (US)
Rear Axle
4.4 gal (US)
Transmission - Power Shuttle - 4WD
4 gal (US)
Engine Oil - With Filter
2.3 gal (US)

Axle Ratings

Front Axle (4WD) - Dynamic
20233 lb
Rear Axle - Static
50582 lb
Front Axle (2WD) - Dynamic
20233 lb
Front Axle (4WD) - Static
50582 lb
Front Axle (2WD) - Static
50582 lb
Rear Axle - Dynamic
20233 lb

Brakes

Feature (2)
Self-adjusting, completely enclosed and sealed.
Feature (5)
Parking brake is mechanically applied through an adjustable hand lever located on the right console.
Feature (3)
Foot operated brake pedals can be interlocked for roading.
Feature (1)
Brakes meet the following standards: SAE J1473 and ISO 3450 requirements.
Feature (4)
Parking/secondary brakes are independent of the service brake system.

Engine Features

Feature (11)
Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator.
Feature (4)
Front and rear crankshaft oil seals are “lip” type Viton and PTFE designs featuring an integral dust lip.
Feature (14)
High contact ratio/gear train, peripheral fixed isolation top cover and open deck block design reduce bare engine noise.
Feature (7)
Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life.
Feature (1)
Regeneration is passive and does not require any input from the operator or disrupt work.
Feature (2)
Three-ring pistons made of lightweight, silicon/aluminum alloy for strength and maximum thermal conductivity.
Feature (12)
Direct electric, 12-volt starting and charging system with 880 CCA Group 31 maintenance free battery.
Feature (5)
For durability, inlet valves are nitrided, martensitic chrome silicon steel.
Feature (15)
Higher low end torque for better engine/machine performance.
Feature (8)
Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness.
Feature (10)
Direct injection fuel system provides accurate fuel delivery and efficiency.
Feature (3)
Forged chrome/molybdenum-steel crankshaft with salt bath nitrocarburized pins and journals.
Feature (13)
Standard glow plug starting aid system for efficient cold weather starting.
Feature (6)
For durability, exhaust valves are nitrided, austenitic chrome manganese-nickel steel.
Feature (16)
Engine is equipped with electric fuel priming pump.
Feature (9)
Cylinder head's intake and exhaust ports are precision cast to promote optimum gas flow.

Steering

Turning Circle - 2WD/AWD (inner wheel not braked) - Outside Widest Loader Bucket
36 ft
Bore
2.6 in
Stroke
4.7 in
Type
Front Wheel
Power Steering
Hydrostatic
Turning Circle - 2WD/AWD (inner wheel not braked) - Outside Front Wheels
26.8 ft
Axle Oscillation
11°
Rod Diameter
1.4 in

Transmission

Power Shuttle Transmission - Reverse 1st
3.4 mile/h
Power Shuttle Transmission - Reverse 4th
23 mile/h
Power Shuttle Transmission - Forward 3rd
12 mile/h
Power Shuttle Transmission - Reverse 2nd
5.5 mile/h
Power Shuttle Transmission - Forward 1st
3.4 mile/h
Power Shuttle Transmission - Forward 4th
23 mile/h
Power Shuttle Transmission - Reverse 3rd
12 mile/h
Power Shuttle Transmission - Forward 2nd
5.5 mile/h

Tires

Choice 2
Front: 12.5/80-18 (12 ply) 1-3; Rear: 19.5L-24 (12 ply) ATU
Choice 3
Front: 12.5/80-18 NHS (12 ply) 1-3; Rear: 21L-24 (16 ply) R4 ATU
Choice 1
Front: 11L-16 (12 ply) F-3; Rear: 19.5L-24 (12 ply) R4 ATU
Choice 4
Front: 340/80R18; Rear: 19.5L-24 (12 ply) R4 ATU