Get a Quote
There is currently no image for this product.
415F2 IL Industrial Loader
Get A Quote

The Cat® 415F2 IL Industrial Loader delivers performance, fuel efficiency, superior hydraulic system and an all new operator station.

Standard Equipment


Dig Depth - Standard
3 ft


Operating Weight - Maximum
17637 lb
Operating Weight - Nominal
14035 lb
17637 lb
Four Wheel Drive
359 lb
Extendible Stick (no weights)
101 lb
Air Conditioning
2018 lb
Counterweights (Option 1)
3622 lb
Counterweights (Option 2)
255 lb
Counterweights (Option 3)
530 lb

Hydraulic System

Circuit Type
Pump Capacity (@ 2200 rpm)
5.5 gal/min
System Pressure - Backhoe
13 psi
System Pressure - Loader
23 psi
Pump Type
Steering Type
Power Steering
2WD Cylinder - Bore
23 in
Closed Center in
Rod Diameter
Variable Flow, Axial Piston in
4WD Cylinder - Bore
33.0 in
2973 in
Rod Diameter
2973 in


Front Wheel
Cab - ROPS
Cab - FOPS
Cab - Sound
Exterior Sound


Net Power - SAE J1349
68 hp
Engine Model (Standard)
Cat C3.4B
Gross Power - SAE J1995
74 hp
Net Power - ISO 9249
74 hp
Gross Power - ISO 14396
68 hp
Net Power - EEC 80/1269
68 hp
69 in
72 in
73 in3
Net Peak Power @ 1,800 rpm - EEC 80/1269
73 hp
Net Peak Power @ 1,800 rpm - ISO 9249
3.90 hp
Net Peak Power @ 1,800 rpm - SAE J1349
4.33 hp
Net Torque Rise @ 1400 rpm - Standard
207 %
Net Peak Torque @ 1400 rpm - Standard - SAE J1349
88 lb ft


Bucket Capacity - General Purpose
1015 yd3
Bucket Width - General Purpose
198 ft

Service Refills

Cooling System
4.4 gal
Fuel Tank
42 gal
Transmission-Torque Converter, 2WD, Power Shuttle
2.3 gal
Transmission-Torque Converter, 4WD, Power Shuttle
4.0 gal
Rear Axle
4.0 gal
Rear Axle, Planetaries
4.4 gal
Front Axle, 4WD
0.4 gal
Front Axle, Planetaries
2.9 gal
Hydraulic System
0.2 gal
Hydraulic Tank
23.8 gal

Axle Ratings

Front Axle, 4WD, Static
50582 lb
20233 lb
Rear Axle, Static
50582 lb
20233 lb
Purpose-Built Design for Strength and Versatility

Purpose-Built Design for Strength and Versatility

The Cat 415F2 IL Industrial Loader combines the design of the Cat 415F2 Backhoe Loader with purpose-built components made specifically for industrial loader applications, such as new hydraulic valves and controls, loader arms, three-point hitch and an available box blade scraper developed for the skip loader market.

Ergonomic Operator Station

Ergonomic Operator Station

Ample legroom inside the cab makes rotating the seat simple. The air suspension seat provides comfort to the operator while roading.

Complete Machine Control

Complete Machine Control

The Cat Industrial Loader offers dual differential lock control. In adverse conditions, the operator has the option of engaging the differential lock from the floor mounted pedal or by using the push button on the loader joystick.

Superior Blade Controls

Superior Blade Controls

The Cat Industrial Loader offers finger lever pilot controls that require less operator effort. The new 415F2 IL comes standard with a five function hydraulic valve for increased versatility.

Machine Performance

Machine Performance

The proven Cat C3.4B engine delivers solid performance, meets Tier 4 Final/Stage IV emission standards, and requires no diesel exhaust fluid (DEF).

  • Air cleaner
  • Alarm, back-up
  • Audible system fault alarm
  • Box Blade Controls, finger lever pilot
  • Battery, maintenance-free, 880 CCA
  • Battery disconnect switch
  • Battery remote jumpstart
  • Brace, lift cylinder
  • Brake, secondary parking
  • Brakes, hydraulically boosted, oil disc, dual pedals, interlocking
  • Bucket level indicator
  • Canopy, ROPS/FOPS
  • Coat restraint
  • Coolant/antifreeze, extended life
  • Counterweight, bumper
  • Dome light (cab only)
  • Diagnostic port for engine
  • Differential lock, floor mounted
  • Differential lock, loader joystick
  • Drink holders, two
  • Engine, Cat C3.4B, meets Tier 4 Final emission standards, diesel particulate filter
  • Engine enclosure, sound suppression removal panels
  • Face seals, O-ring
  • Fan, suction and guard
  • Fast reversing shuttle, all gears
  • Fenders, rear
  • Filters, spin-on: fuel, engine oil, transmission oil, water separator
  • Filters, bowl and cartridge: hydraulic fluid
  • Flashing hazards/signal lights
  • Floor mat
  • Fuel tank, fully enclosed
  • Fully hinged front grill for cooling package cleaning access
  • Gauge cluster: coolant temperature, fuel level, torque converter temperature, battery voltage
  • Ground level fuel fill
  • High ambient cooling package
  • Hitch, rear 3-point
  • Hood lock, inside cab
  • Hydraulic hose, Cat XT™-3
  • Hydraulic oil cooler
  • Hydraulic oil level sight gauge
  • Hydraulic valve, hydrostatic steering
  • Hydraulic valves, loader 3 function
  • Hydraulic valves, rear 5 function
  • Hydraulics, load sensing with variable displacement piston pump
  • Indicator lights and LCD warnings for system status
  • Instrument panel lights
  • Key start/stop system
  • LCD screen with machine system information
  • Lights, working (2 front, 2 rear)
  • Loader, self-leveling, return-to-dig and transmission disconnect switch
  • Loader, single tilt
  • Mirror, rearview
  • Open circuit breather
  • Power receptacle, 12 volt, 2 internal, 2 external roof mounted
  • Power steering, hydrostatic
  • Seat belt, retractable, 75 mm (3 in)
  • Steering knob
  • Seat, mechanical suspension, fabric or vinyl cover, with armrest
  • Starting system, glow plugs
  • Steering, hydrostatic
  • Storage compartment, lockable
  • Storage tray
  • Stop and tail lights
  • Tires, 12.5/80-18 front, 16.9-24 rear
  • Toolbox, external, lockable
  • Torque converter
  • Throttle, foot, electronic
  • Transmission, four speed, syncromesh
  • Transmission neutralizer switch
  • Transport tie-downs
  • Four Wheel Drive
  • Warning horn, electric