Get a Quote

Ideal for commercial fertilizer dealers, custom applicators and large farming operations, Willmar’s truck- or trailer-mounted 10- and 16-ton tenders have two large capacity hoppers that feed into one auger and can carry nearly any single, dry-material product. These tenders can load an applicator or planter at up to two tons per minute.

Willmar rear-discharge tenders have discharge rates from 2400 pounds of urea per minutes to 4000 pounds of potash per minute. Fast material flow and cleanout of these rear-discharge tenders is possible with the 30 degree (1600) or 40 degree (10-ton) minimum hopper slope angles. Manufactured from 409 stainless steel, Willmar tenders are also finished with a special epoxy primer and modified acrylic urethane paint for maximum corrosion resistance as are the rear-discharging augers.

Auger on/off and raise/lower controls are located on the left rear corner of the tender while the self-contained hydraulic system is PTO driven with a 10 gallon reservoir. Accessibility to the hoppers is provided with rear-mounted ladders which improve the sightline of the fill and flow status.

Model Specifications

Image unavailable

Willmar Rear-Discharge Tender
Get A Quote
10-ton
1600
Model
10-ton
Hopper Capacity – Struck
340 cu. ft.
Hopper Capacity – Heaped
380 cu. ft.
Hopper Compartments
2 @ 170 cu. ft. each.
Weight Empty
2280 lbs.

Discharge Capacity

Potash
3600 lbs./min.
Dap
3200 lbs./min.
Urea
2400 lbs./min.

Hopper Dimensions (does not include auger, tarp bow and truck)

Length
144 in.
Height above truck frame
82 in.
Width
92 in.
Slope Angle
40 degrees minimum

Hopper MateriaL

  • 12-gauge, 409 stainless steel

Rear Auger Dimensions

Length
19 ft.
Diameter
10 in.

Hopper and Auger (19-foot) Dimensions
(does not include tarp bow and truck)

Discharge Height
Raised: 117.5 in./ Lowered: 89.5 in.
Auger Reach
Raised: 138 in./ Lowered: 107.5 in.
Overall Length
Raised: 284.5 in./ Lowered: 300 in.

Paint

  • 2-part, high-performance, chemical-resistant epoxy primer and a 2-part, modified high-gloss acrylic urethane paint

Lighting

  • Complete Kit to DDT Specifications
Model
1600
Hopper Capacity – Struck
500 cu. ft.
Hopper Capacity – Heaped
560 cu. ft.
Hopper Compartments
2 @ 250 cu. ft. each.
Weight Empty
2720 lbs.

Discharge Capacity

Potash
4000 lbs./min.
Dap
3370 lbs./min.
Urea
2745 lbs./min.

Hopper Dimensions (does not include auger, tarp bow and truck)

Length
192 in.
Height above truck frame
87.7 in.
Width
96 in.
Slope Angle
30 degrees minimum

Hopper MateriaL

  • 12-gauge, 409 stainless steel

Rear Auger Dimensions

Length
19 or 21 ft.
Diameter
10 in.

Hopper and Auger (19-foot) Dimensions
(does not include tarp bow and truck)

Discharge Height
Raised: 108.25 in./ Lowered: 88.75 in.
Auger Reach
Raised: 129.5 in./ Lowered: 106 in.
Overall Length
Raised: 321.5 in./ Lowered: 331 in.

Hopper and Auger (21-foot) Dimensions
(does not include tarp bow and truck)

Discharge Height
Raised: 117 in./ Lowered: 78.5 in.
Auger Reach
Raised: 138 in./ Lowered: 95.5 in.
Overall Length
Raised: 340 in./ Lowered: 358 in.

Paint

  • 2-part, high-performance, chemical-resistant epoxy primer and a 2-part, modified high-gloss acrylic urethane paint

Lighting

  • Complete Kit to DDT Specifications